Painting

PAINTBOX MILLENIUM PLUS

Dimensions and technical data:

Inner usable dimensions
Width:	4000 mm
Height:	2500 mm
Length:	6000 - 7000 mm

Inner usable dimensions
Width:	2450 mm
Height:	2500 mm

Hot air generator
Heat output:	196 kW
Fuel:	natural gas, warm water
Air passage:	10000-25000 m³/h
Installed power capacity:	1x5,5 - 2x4 kW
Voltage:	400 V 50 Hz

Extractor
Air passage:	10000-28000 m³/h
Installed power capacity:	1x5,5 - 2x4 kW
Voltage:	400 V 50 Hz

Operating temperature
Painting phase:	20°C
Drying phase:	80°C

Lighting
24 neon tubes, 36W each	864 Watt in total
Protection rating	IP55
Illuminance level 50cm above floor:	1430 Lux
Illuminance level 150cm above floor:	1800 Lux

Main advantages of the paint box include:
- Operation efficiency (40 percent fuel savings), ECO-AIR patent
- Ecological activated-carbon cleaners compliant with EU and Czech standards
- Maximum hygiene during the painting and excellent cleanliness in the paint shop
- Low noise levels even at high performance rates
- Enclosure made from aluminium profiles
- Uniform distribution of light; no shade inside the box
- Various heating options
- Modular system allowing optimized use of the paint shop spaces
- Air passage can be increased by as much as 10 percent in a low-cost way
- Filters can be easily replaced

PAINTBOX FUNCTIONS:

Painting phase: Outside air is sucked-in by the fan through a pre-filtration unit. After warming up in the heat exchanger it passes through the ceiling-mounted filters and flows out freely and separated from impurities. A uniform air flow from top to bottom is maintained inside the box enabling the paint residues to be conveyed to the floor-mounted filters where they settle down. Pre-heated surplus air is characterised as an open system with full continuous air exchange. The box itself and the whole circulation system up to the fans are maintained under a slight overpressure. Infiltration of even smallest dirt particles can thus be eliminated.

Drying phase: The drying process proceeds by distributing the air volume entering into the box space by means of a safety flap valve mounted under the heat exchanger.Part of the warmed-up air entering into the box is mixed with approx. 20% of cold air from outside and the air mixture is warmed-up in the heat exchanger (recirculation). This patented system can save 60% of fuel even in the drying phase. During this phase, harmful vapours are conducted away and taken into a cleaning station with activated carbon. Such an open cycle prevents saturated air from getting back into the paint box and generator interior. The whole cycle is driven by one half of electric motors only. After the preset time is elapsed, the automatic cool-down process is initiated and, once finished, the box is switched off automatically.